Edwards HAT1000, Руководство по безопасности и инструкция, Страница: 6 / 34

4
Warning Panel
Shear/Crush Hazard
Moving parts can cut and crush. Keep
hands clear while operating. Lockout
power before servicing. Immediately
replace guards after adjustment, repair or
service.
Wear Personal Protective
Equipment
To avoid physical hazard, always wear per-
sonal protective equipment. Wear protec-
tive eyewear, clothing, gloves, footwear,
head-gear and hearing protection while
operating or servicing this machinery.
Fluid Injection Hazard
Hydraulic hoses and cylinders are under
pressure. Pressurized fl uid can pierce skin
and cause severe injury. To avoid physical
hazard, always wear personal protective
equipment. Keep hands clear while oper-
ating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service.
Do Not Operate With Guard
Removed
Physical barriers and guards have been
designed and installed to protect the
Operator from moving parts that can pinch,
cut and crush. Keep hands clear while
operating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service to moving parts.
Tilting Operation
The bender can be operated in either a
horizontal or vertical position. Exercise
care when changing the operating position
of the bender and during operation of the
bender.
Tilting Operation
The head-frame of your Edwards 10 Ton
Tube/Pipe Bender is mounted with a yoke
and pin to a sleeve and stop mechanism in
the bender stand. This mounting confi gu-
ration allows for the bender head-frame to
be operated in either a horizontal or vertical
orientation. Exercise care when changing
the operating position of the bender and
during operation of the bender.
Caution Panel