Edwards HAT1000, Руководство по безопасности и инструкция, Страница: 19 / 34

3
Edwards Benders are designed to bend solid round, Schedule 40
pipe, tube, square tube, and d.o.m. tube.
ALL EDWARDS HYDRAULIC ACCESSORY TOOLS ARE POWERED
BY AN EDWARDS IRONWORKER OR EDWARDS PORTA POWER,
PORTABLE HYDRAULIC POWER-PLANT.
REFER TO THE SAFETY, INSTALLATION, OPERATIONS AND
MAINTENANCE MANUALS FOR THE EDWARDS POWER-PLANT YOU
ARE USING TO OPERATE YOUR EDWARDS HYDRAULIC ACCESSORY
TOOL.
The following pages detail the proper operation procedures for
setting up and safely operating the Edwards 10 Ton Tube/Pipe
Bender.
Reasonable, common sense safety precautions should be observed when
operating the Ironworker or Hydraulic Accessory Tool. The following pre-
cautions are described in order of their hazard.
Electrical Hazard
Dangerous high voltages are present inside the electrical enclosure
of this product. Only qualifi ed, authorized, maintenance or service
personnel should gain access to the electrical panel.
Lockout Power
Danger, circuits are live. Lockout / tagout upstream power source
before any maintenance activity is performed.
Shear / Crush Hazard
Moving parts can cut and crush. Keep hands clear when servicing
and maintaining the Ironworker.
Hydraulic Fluid Hazard
Hydraulic hoses and cylinders are under pressure. Pressurized fl uid
can pierce skin and cause severe injury. To avoid physical hazard,
always wear personal protective equipment when servicing /
maintaining the Ironworker.
Do Not Operate With Guard Removed
Physical barriers and guards have been designed and installed
(where possible) to protect personnel from moving parts that can
pinch, cut and crush. If it is necessary to remove guarding when
servicing the Bender, immediately replace guards after service and
prior to power being restored to the machinery.
Refer to Manuals
For safe installation, operation and maintenance of the machine,
read:
Installation Manual
Safety Instructions Manual
Operations Manual
Maintenance Manual
Wear Personal Protective Equipment
To avoid physical hazard wear protective eyewear, clothing, gloves,
footwear, head-gear and hearing protection.
Operational Precautions
Machine Operations
WARNING: This product can expose you to chemicals
including Methyl Isobutyl Ketone which is known to the State of
California to cause cancer and birth defects or other reproduc-
tive harm. For more information go to http://www.p65warnings.
ca.gov.
WARNING: Some dust, fumes and gases created by pow-
er sanding, sawing, grinding, drilling, welding and other construc-
tion activities contain chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead based paint
• crystalline silica from bricks, cement and other masonry
products
• arsenic and chromium from chemically treated lumber
Your risk of exposure varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals, work
in a well-ventilated area and work with approved safety equip-
ment, such as dust masks that are specifi cally designed to fi l-
ter out microscopic particles. For more information go to http://
www.p65warnings.ca.gov/ and http://www.p65warnings.ca.gov/
wood.