Edwards EDS 200, Инструкция по эксплуатации

Страница: 41 / 56

Cooling-water should be visible in the cooling-water level sight glass above the gearbox. If no
water or Drystar mixture is visible, the system will require additional coolant. Fill up the
system with adequate coolant, so that the sight glass is completely filled up.
Figure 19 Cooling water level
CS
/4062/
A
max.
min.
9.5 Inspect pipelines and connectors
Inspect all of the cooling system and purge gas pipelines and connections. Check that they
are not corroded or damaged. Replace any of the pipelines and connections that are
corroded or damaged. Check that all connections are secure. Tighten any loose connections.
Inspect all of the electrical cables. Check that they are not damaged and have not
overheated. Replace any cables that are damaged or have overheated. Check that all of the
electrical connections are secure. Tighten any loose connections.
Inspect all of the process inlet and exhaust pipelines and connections. Check that they are
not corroded or damaged. Replace any of the pipelines and connections that are corroded or
damaged. Check that all connections are secure. Tighten any loose connections.
Page 41
A41802880_C - Maintenance