Edwards Barocel 7025, Инструкция по эксплуатации

Страница: 15 / 32

Page 13
W602100880_A - Installation
Installation
Vacuum connection
WARNING: NOT FAIL-SAFE DESIGNED
Risk of death. Do not use the Barocel 7025 for safety critical applications. The gauge is not
intended to be fail-safe.
CAUTION: IMPACT DAMAGE
Risk of damage to equipment. The ceramic sensor can be damaged by impacts. Do not
drop the gauge.
WARNING: PRESSURIZED CONTAINER
Risk of injury or death. A release of parts and process gases because of system
overpressure greater than 1 bar causes a hazard. Do not open any clamps while the
vacuum system is pressurized. Use clamps designed for overpressure conditions.
WARNING: PRESSURIZED CONTAINER
Risk of injury or death. A release of process gases because of system overpressure greater
than 2.5 bar causes a hazard. KF flange connections with elastomer seals cannot resist
such pressures. Use O-rings with an outer centring ring.
WARNING: HIGH VOLTAGE
Risk of electric shock. Make sure that the pump and electrical cables are correctly
protected against earth (ground) faults. A protective earth (ground) conductor
(equivalent or larger than the incoming supply power cable conductor) must be attached
to the protective earth (ground) stud.
CAUTION: DIRT CONTAMINATION
Risk of damage to equipment. Dirt and damage will cause the gauge to operate
incorrectly. When you handle the gauge, prevent dirt and damage to the vacuum
components.
CAUTION: DIRT SENSITIVE AREA
Dirt sensitive area. Do not touch the components with bare hands as it increases the
desorption rate. Wear clean, lint-free gloves and use clean tools when you work in this
area.