Edwards A34310940, Инструкция по эксплуатации

Страница: 21 / 56

E2M18 1.05 litres
* To operate the pump when the ambient temperature is outside the range specified in
Operating and storage conditions on page 13 or to optimise pump performance when
processing condensible vapours, a different oil may be required.
3.5 Electrical data
Refer to Table: Electrical data: three-phase motors on page 17 and Table: Electrical data:
single-phase motors on page 17 . For motor current information please refer to the
motor rating plate. The motor start-up current is drawn for less than one second, so
time-lag fuses must be used to prevent unnecessary fuse failure when the pump starts.
Fuses should be to EN60269 Performance on page 13 . If using the pump at temperatures
lower than 13 °C, the start-up current will be drawn for longer; this may cause the motor
thermal overload device to open.
Table 5
Electrical data: three-phase motors
Pump item
number
Voltage (V)
Frequency
(Hz)
Full load
current
(A)
Recommended supply
protection (A)
A34310940 200 - 220 50 3.3 10
380 - 415 50 1.9 6
200 - 230 60 2.3 10
460 60 1.6 6
A36310940 200 - 220 50 3.3 10
380 - 415 50 1.9 6
200 - 230 60 3.4 10
460 60 1.6 6
Motor output rating (continuous)
50 Hz operation 0.65 kW
60 Hz operation 0.75 kW
Table 6
Electrical data: single-phase motors
Pump item number
Voltage
(V)
Frequency
(Hz)
Full load current (A)
A36315903, A34316903,
A34315903
220 - 240
230 - 240 50
60 4.6
5.0
A34315981, A36315981 115
230 60
60 11.0
5.5
A34315904, A36315904 100
100 - 105
200
200 - 210 50
60
50
60 12.0
11.0
6.0
5.5
Page 17
A34310880_T - Technical data