HERE’S HOW TO SERVICE YOUR OSCAR MX AT HOME:
•
Inspect all the rivets and screws
that
connect your stroller together. They
should be clean, tight and secure.
•
Remove the wheels
(back and front)
and wipe them clean with a clean
rag to remove any dirt, sand or other
debris. Wipe out the wheel housing.
Rear wheels only: Spray the wheel pins
with some WD-40 to keep the wheel
release running smoothly.
•
Make sure the fold joints are free of
dirt and debris
. Wipe clean with a
damp cloth. We suggest cleaning the
fold joints when the stroller frame is
folded. Apply some WD-40 or Silicone
spray (available at Bunnings, Mitre
10 or your local supermarket) to the
moving hinges.
•
To prevent the metal components
from rusting
, wipe down your stroller
frame with a damp clean rag after
beach or rain use, especially when
used in windy & exposed areas. Always
store in a dry place. Do not store
your stroller in a damp environment
that is not well insulated (such as an
unfinished basement or outdoor shed).
•
If you live or use the stroller within
2kms of the beach or sea
, every 2
months liberally spray a rag with some
WD-40 and wipe it over the rivets and
screws to add an additional coating
layer against corrosion.
FINE SAND
CAN INTERFERE WITH THE BRAKES:
AVOID WHERE POSSIBLE.
•
If you do find some corrosion forming
on the rivets or screws
, you can wipe
it clean with a damp cloth. Dry it
overnight, then liberally apply a layer
of WD-40 as above. Repeat monthly.
Just like your car, regular service extends
the life of your Oscar Mx stroller.
Below are some helpful tips to keep your wheels smooth and
enjoyable to use. We recommend servicing your stroller at
least every 6 months and an inspection at least once a month.
Servicing Guide
If you have any questions relating to
servicing your stroller, email us
[email protected] or call
New Zealand: 09 869 8950
Australia: 02 90666702
