Edu-Logger 900-230, Руководство пользователя

Страница: 6 / 16

6
6. Once a CO2 sensor logo appears on the left side
of the screen the probe has been automatically
identified and you can begin experimentation.
7. If the CO2 sensor is not automatically identified
then click the “Search for sensors” icon to find
the sensor.
8.
Select the “On-line experiment” button; this will
open a graph below.
9.
Click on the “Module setup” button located on
the CO2 sensor icon in the module window to
change the sensor settings if need be.
10. Click on the "experiment set up" button to change
the experiment settings if need be (experiment
duration for example).
11. The CO2 sensor will give a live reading in the
box to the left of the screen while plugged in.
12.
To run an experiment and collect data click “Run
experiment”.
13.
To end data collection early, click “Stop
experiment”.