7
Off-line experiments
(Off-line experiments are when you do not have a
sensor connected directly to a computer, tablet,
smartphone, or Edu-Logger viewer).
Materials needed:
900-202 Current Sensor
900-215 Battery module
Materials needed to configure your offline
experiment:
900-213 Module, 900-268 module or 900-272
Viewing Module
USB to mini USB cable (included with the 900-
213 module)
Procedure:
1.
Connect the current sensor directly to the left side
of a charged 900-215 module.
2.
When ready to collect data, press the “Start/Stop”
button on the current sensor, a red light will turn
on for the duration of the experiment.
3.
To change the experiment settings, first connect
to your chosen device (PC, Mac, tablet, smart
device) and select the “Module setup” button.
(For more information on how to change the
experiment settings view the quick start
procedure section for your chosen device in this
document.)
4.
After the experiment has concluded (when the
“Start/Stop” button is pressed again or the data
collection period ends) connect the sensor to your
chosen device (you can find full instructions in
each device’s quick start procedure section).
5.
Open the Edu-Logger software.
6.
Click the “Off-line experiment” button.
