typhoon SB201
2010
8 / 22
6 S
PECIFICATIONS
SI -Standards
USA / CDN
Rated voltage
400 V
460 V
Current consumption
16 - 32 A
14 - 55 A
Power
20 KW
27 hp
Frequency
1000 Hz
Revolution speed
0 – 1140 U/min
0 – 1140 rpm
Protection class
IP 56
Cutting speed
2 - 60 m/sec
Cooling medium
water
Weight with drive motor
33,0 kg
72.7 lbs
7 S
ETUP
7.1 Preparations at the workplace
Warnings and safety precautions
Before using the wall saw read the chapter Safety and follow the instructions.
Energy supply
Ensure that the power supply at the construction site is properly fuse-protected.
7.2 Extension cords
Use only approved extension cords of adequate ladder cross-section. Eurostandard plug in compliance
with EN 60309 or UL/CSA 50 A / 480 V
7.3 Clarification and security in the workplace
Get approval of the building supervisor for sawing and planning the cut-outs. Affix the necessary
supports, barriers and warnings for third persons.
7.4 Marking the cutting line and fixtures
Generally the contractor marks the parts to be cut out. The parts to be cut out must be in keeping with the
circumstances, e.g. weight of the concrete blocks, handling, floor load.
