typhoon SB201
2010
11 / 22
7.7 Guide rail extension
Longer cuts are made with interlocked guide rails. The rails are centered using a centering pin and
centering bushing. The guide rail join must be in the middle of the support bracket.
Set up the rails only by hand or with a soft-
faced hammer!
Never let the saw touch the limit stops –
danger of breaking.
7.8 Mounting the wall saw
Place the main saw head with attached drive motor on the guide rail, lock on
and secure.
Free-from-play locking
There must be no play and no jamming between the rollers and the guide
rails in order to achieve a straight and clean cut. This is achieved by turning
the eccentric bolts.
7.9 Mount the stirrup underpinning
The stirrup underpinning is set onto the saw head
with the aid of the guiding fastener (ring). The two
guidings of the stirrup are led into the set secured
guiding fastener and the stirrup is mounted and
fixed.
Locking the guiding fastener
Saw head without stirrup or guiding fastener
Mounting the stirrup underpinning into the ring
on the saw head
