• 120V, 60Hz, 70W, 5 Oz (142 gm)
• TEMP. RANGE: 400°F - 800°F (205°C - 427°C)
• TEMP. REGULATION: ±6°F (±3°C)
• TIP TO GROUND LEAKAGE: < 2MV
• TIP TO GROUND RESISTANCE: < 2 OHMS
• COMPLIES WITH DOD-STD-2000-1B, MIL-
STD-2000A and ESD SPEC. DOD-STD 1868,
DOD-HDBK-263
LISTED
made
in
U S A
935
Soldering Station
includes CL1080 , PD528 and PS536
Sponge Holder
Power Switch
930
Soldering Station
includes CL1080 and IP329
WICK AND SOLDER SUPPLIES SOLD
SEPARATELY
PD528 Tool Holder
not included with PS536
Sponge Holder
IP329
Tool Base
PS536
Power Supply
TIP CARE
1. Plug-in Tool. Set to desired temperature. (Blinking lamp means
set temperature is reached.)
2. TIN the Tip (apply solder) before soldering.
3. Do not rub, bend or file Tip.
4. Always clean the Tip by wiping it against the saturated sponge,
then re-tin.
5. ALWAYS RE-TIN THE TIP BEFORE AND AFTER USING.
Temp. Regulation
Temp. Control
CL1080
LONER
®
Temperature Controlled
SOLDERING INSTRUMENT
120 VAC
Receptacle
RS372
Retaining Sleeve
Hollow Heater
Soldering Tip
Burn Resistant
