CHANGING TIP
RS372
soldering tip
1. MAKE SURE YOUR TOOL IS
COOL!
2. Turn
RS372
counter-
clockwise to remove.
3. Remove old Soldering Tip.
4. Insert new Tip.
5. Install RS372. (should be
"finger" tight only.)
SOLDERING TIPS
Iron Plated for long life•Nickel and
Chrome Plated for optimum heat transfer
CONTACT EDSYN FOR MORE SELECTIONS
b
a
a
b
Large and heavy tip for
heavy duty soldering.
Fine point tip for SMD
soldering.
.03 (0.8 mm)
.48 (12.2 mm)
.06 (1.5 mm)
.48 (12.2 mm)
.02 (0.5 mm)
1.13 (28.8 mm)
.07 (2.0 mm)
.93 (23.6 mm)
.03 (0.8 mm)
.48 (12.2 mm)
.10 (2.5 mm)
.74 (18.8 mm)
.06 (1.5 mm)
1.21 (30.7 mm)
.04 (1.0 mm)
1.21 (30.7 mm)
.20 (4.9 mm)
.93 (23.6 mm)
.32 (8.3 mm)
.97 (21.1 mm)
LT374
Standard Probe
LT375
Standard Spade
LT392
Extra-Long Needle Point
LT394
Extra-Long Spade
LT446
SMD Probe
LT337BC
Heavy Duty Terminal Spade
LT223BC
Heavy Duty Fine Spade
LT222BC
Extra long Needle Point
LT153BH
Jumbo Spade
LT155BH
Jumbo Angle Spade
SET-UP & REQUIRED ACCESSORIES FOR HEAVY DUTY AND JUMBO TIPS
Apply
AN112 or
AN122* Anti-Seize
Compound
to Heater
and area of Tip con-
tact.
"BC" HEAVY DUTY TIP
AC735
TA350
JUMBO TIP
RS351
RS271
*AN122 Anti-Seize Compound comes in
syringe dispenser.
To replace Pod, press Release Tab
and slide out Pod.
pull
PD528
LN230
SH230-1
CAUTION:
Over-filling can cause thermal shock to the tip or
heating element during tip cleaning.
RS243
RS199
• Replace RS199 Cleaning Sponge
1. Fill water only up to the top of the
RS243
Leveling Pad.
2. Depress
RS199
to moisten it completely.
• Replace SC581 Solder Collector
1. Hold the Housing firm and turn Cap counter-clockwise
and pull it away from the Housing.
2. Remove used
SC581
and replace with a new one.
3. Reassemble Pod with TOP of the Cap in proper position.
MAINTENANCE
SC581
SR043
Front Housing
SR042
Thermal Housing
press
