EDP EDP-C2, Руководство по установке

Страница: 3 / 21

3
Introduction

EDP-C2 consists of a complete electronic concept which allows a greater control of the working
parameters resulting in increasing the lifespan of the generator and the electromagnet.

The controller is easy to install. It only needs a few connections and it is pre programmed and
ready to use.

The controller adapts to most generators (within a range of 180 volts DC to 300 volts DC of
range with a maximum of 5 amps) on field.

The amperage of the electromagnet does not affect the controller.

The system tol - 10% of generator RPM without affecting the efficiency, which is very
useful for the systems that use hydraulic driven generators.

The controller`s display shows the voltage and the amperage applied to the electromagnet.

The controller also shows the modulation and the voltage applied to the field signal.

The information displayed by the controller will allow us to guide you in the adjustments at a
distance, to increase the efficiency or to help fix your lifting equipment.