6
Movement 47, 85, 853
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion):
when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding:
if the watch has not
been worn for more than 42 hours or more,
wind it up with the crown in position 1.
2. Time setting:
hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown for-
wards or backwards. Synchronise the
seconds by pushing the crown back to posi-
tion 1 to coincide with a given time signal.
Movement 87
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion):
when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding:
if the watch has not
been worn for more than 42 hours or more,
wind it up with the crown in position 1.
2. Time setting:
hours and minutes. Pull
the crown out to position 2. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Hand-operating repeater:
by pushing
the pusher-button, you start the 5 minutes
repeater mechanism: the first series of
blows strikes the hours (one tone) – the
second series of blows strikes every five
minutes (two tones). For example:
11:43 minutes: first 11 single tones – the
hours – the 8 double tones – the minutes
as 8 x 5 = 40 minutes.
Attention:
let the mechanism ring
entirely before activating it again in order
to prevent damages. Do not set the time
when the ring is activated. Edox declines
all responsibilities of misuse.
Movement 90
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion):
when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding:
if the watch has not
been worn for more than 42 hours or more,
wind it up with the crown in position 1.
2. Time setting:
hours and minutes. Pull
the crown out to position 2. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Moon phase adjustment:
press the
push-button C until the full moon appears
in the centre of the moon aperture.
Determine the date of the last full moon by
using a calendar. Press the push-button C
as often as the number of days which
have passed since the last full moon.
Date setting (31 days):
press the push-
button D until the centre hand points the
desired day.
Month setting (12 months):
press the
push-button A until the desired month is
reached.
Day of the week (7 days):
press the
push-button B to set the day of the week.
Attention:
do not make setting between
22h00 and 02h00 and do not alter the
moon phase between 15h00 and 17h00, to
prevent damage to the watch mechanism.
Movement 93
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion):
when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding:
if the watch has
not been worn for more than 42 hours or
more, wind it up with the crown in posi-
tion 1.
2. Correcting the date:
pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
Correcting the 24 hours hand (GMT):
pull the crown out to position 2, turn the
crown forwards, only the hour hand
moves without affecting the precision ot
the minutes or seconds. If the hand moves
past midnight, the date changes auto-
matically. Push the crown back to
position 1. This hand shows at a glance a
second time zone on a 24 h scale.
3. Time setting:
hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4.3 Hand winding watches
Movement 72
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion):
when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
