Clearing a blockage of the film
1.
This machine is equipped with a film blockage function in order to resolve any
blockage of the film. Such function is featured by ABS button on BACK SIDE of the
laminator.
2.
Please switch off the machine immediately by setting the switch to “O” and pull out
the plug from the mains socket outlet, let the machine to cool down briefly (for hot
laminating) and push the ‘ABS’ anti-film blockage button on back as direction
indicated by the arrow sign, whenever there is a blockage of the film.
3.
Hold the ABS switch firmly with one hand and pull out the film completely from the
machine’s feed opening or delivery opening with the other hand.
4.
After you have resolved the blockage of the film and released the ABS switch, this will
go back to its starting position again. Now you can use the machine again completely.
5.
Please contact our service hot line if there is a blockage of the film again.
Cleaning and care
1.
Please pull out the plug from the mains socket outlet always, in order to clean the
machine. Take care while doing so that the plug does not come into contact with any
liquids.
2.
Allow the machine to cool down before cleaning it.
3.
Clean the machine with a slighly moist, soft cloth. Do not use any caustic or abrasive
cleaning agents while doing so.
Package:
Laminator
Instruction manual
Technical data
Mains voltage (V)
220-240VAC 50Hz 1.3A
Consumption 310W
Laminating width
240 mm
Size of the machine (mm)
ca. 355 x 135 x 58 mm
Film of utilizable thickness
80 - 125 microns
Heating up time
3 min. approx..
Speed 400 mm/min
