Edmonds AiroMatic, Руководство по эксплуатации продукта

Страница: 4 / 20

4
STEP 1
Remove one tile
from the third row
down from ridge
cap.
If the gap
produced is less
than a 250mm
square opening
then either push
the tiles above
upwards or cut the
tiles to provide
clearance
Installation—Tiled Roof
The removal of a tile higher than this may damage the integrity of
the ridge tile pointing and is NOT recommended
STEP 2
If the roof is
‘sarked’ , Cut
sarking in a cross
folding back the
corners outwards
to give a 250mm
square opening.
Tape the corners
down with foil tape
to prevent them
from fouling the
fan