Edmonds AiroMatic, Руководство по эксплуатации продукта

Страница: 18 / 20

18
FAQ & Troubleshooting
Troubleshooting
Problem Possible Actions
Motor / Fan Not Running
Controller may be in AUTO Mode and may have
determined that no ventilation is necessary.
Change to LO to confirm controller is functioning
correctly
Check all connections are secure
Check power supply is plugged in
Check power point is turned on
Water leaks when raining
Check installation integrity
Reseal around edge of flashing
Q: Do I need an electrician to install the Airomatic?
A: If you have an available power point that can be reached then no
electrician is required. If a power point is unavailable then an
electrician will be required to install one.
Q: Can I wire it directly into the mains power?
A: No, you must use the supplied power supply and speed controller for the
Airomatic to work correctly. Failure to do so may damage the product.
Q: Can I duct the Airomatic?
A: Yes, however a suitable collar or adaptor would be required to
attach the ducting (Not Supplied). This must allow the cable of the
Airomatic to be passed through.
Q: Can I paint the Airomatic?
A: Yes, standard spray paint can be used to paint the Airomatic. No
plastic primer is required, however the surface must be clean before
paint application. Do not get any paint on the motor/fan module. The
Airomatic can be disassembled to facilitate easier painting. Instructions
for disassembly can be seen on pages 13-15 of this manual.