EDM Product 08761 Скачать руководство пользователя

Страница: 33 / 58

Kickback forces can be controlled by the operator, if proper

precautions are taken. Do not let go of the chain saw.

• Do not overreach and do not cut above shoulder height.

This helps prevent unintended tip contact and enables

better control of the chain saw in unexpected situations.

• Only use replacement bars and chains speciﬁed by the

manufacturer. Incorrect replacement bars and chains may

cause chain breakage and/or kickback.

• Follow the manufacturer’s sharpening and maintenance

instructions for the saw chain. Decreasing the depth gauge

height can lead to increased kickback.

• The ﬁrst time user should request an experienced operator

in the use of the chainsaw and the protective equipment,

and should be have the initial practice cutting logs on a saw

horse or cradle.

Attention for usage of electric chain saw

• Before any cutting, you must wait for the saw chain

running to reach a stable speed.

• When cutting wood, please do not press the chain saw

with big force.

• During cutting, if the saw chain is stuck in the wood, please

stop the saw immediately, and take

the saw out of the wood carefully. Restart the saw till the

saw chain reaches a stable speed, and

then recut again.

• Operate the machine properly, activate the trigger

completely during use. And do not work

continuously for a long time to avoid overuse fatigue.

Important safety

1 Avoid bar nose contact.

2 Beware of kick back.

3 Do not attempt to hold saw with one hand.

4 Recommended cutting procedure. Hold saw properly

with both hands.

Intended use

This device is speciﬁcally intended for sawing wood and

felling trees in private areas, unsuitable for sawing plastic,

masonry or construction materials that are not made of

wood, intended for use in accordance with the descriptions

REF. 08761

INSTRUCTION MANUAL

Chain saw

and safety instructions in this operating manual.

The equipment is to be used only for its prescribed purpose.

Any other use is deemed to be a case of misuse.The user /

operator and not the manufacturer will be liable for any

damage or injuries of any kind caused as a result of this.The

user is liable for all injuries to third parties and damage to

their property.

Please note that our equipment has not been designed for

use in commercial, trade or industrial applications. Our

warranty will be voided if the machine is used in

commercial, trade or industrial businesses or for equivalent

purposes.

Содержание 08761



























































Результаты поиска

Содержание 08761

Отзывы:

Похожие инструкции для 08761

Бренды по названию

Популярные бренды

EDM Product 08761, Руководство пользователя

Результаты поиска

Содержание 08761

Отзывы:

Похожие инструкции для 08761

Бренды по названию

Популярные бренды