IMPORTANT SAFETY INSTRUCTIONS:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, PRCEPTACLE OR OTHER OUTLET UNLESS THE BLADE SCAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OF SHOCK HAZARD, NO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIST.
Important Safety Instructions:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufac-
turer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polar-
ized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the tripod sold with the apparatus.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the appa-
ratus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
CAUTION
RISK OF ELCCTRIC SHOCK
DO NOT OPEN
The Lightning flash with arrow-head
symbol, within an equilateral triangle is
intended to alert the user to the presence
of insulated” dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK), NO USER SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instruction in the literature accompanying
the appliance.
• If you don’t search the Bluetooth, press and hold button for 3 seconds to make a new pair.
• If the computer needs to be connected to the device, it is necessary to install the bluetooth
manage ment software. If not, it only can connect and can not transmit the audio. Also, if fail
to find the “Bluetooth”, pls press the button for two or three seconds, then you can find it.
C. NFC Pairing
• Turn the Bluetooth on your NFC Compatible mobile device
• Tap your mobile device onto the NFC logo of the speaker
• Bluetooth blue LED indicator turns solid upon pairing.
USB Charging / Folder function
A.USB Charging mobile device
The ST-5000MKII Has a built in USB battery bank. In order to use this feature you must use your
mobile device’s USB cable (iphone or Android) and connect it to the USB port on the
ST-5000MKII.
B. Folder function
In USB / SD mode, long press the button to enter the folder selection page, press the &
button to toggle the folder selection
CONNECTION USING MIC INPUT
• These balanced inputs accepts a standard XLR and a 1/4” Jack phone plug.
• A board range of signals from microphones, audio(CH1) mixing consoles and electronic mu
-
sical instruments may be connected here.
• The sensitivity of these inputs are controlled by the MIC/LINE
switch.drivers are located.
EQ
Boost: setting low frequency and high frequency equalization is
applied.
Flat: the neutral setting with no extra EQ applied and should be
utilized in most typical PA applications.
Cut:it cuts away low frequency from the systems response.
CONNECTING A MICROPHONE OR OTHER DEVICE
• For this unit you can connect a mixer or microphone directly
into your speaker. To connect a microphone use an XLR or ¼” jack
connector to connect to the MIC (1) input.
• To connect a CD player, turntable or mixer use an XLR or 1/4”
Jack connector to connect to the LINE IN (1) input. If connecting a powered mixer use the
mixers line level signals only.
• You can LINK additional speakers using the LOOP/MIX OUT(2) connection. The amplifier on
your speaker will only power this speaker. If you LINK to additional speakers those speakers
must be self amplified.
• Turn on your mixer/microphones or other signal source, then turn on your unit, the Power
Indicator (3) will be lit. Now you can adjust your volume controls to a reasonable level
3
1
2
-6-
-3-
