15. Mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
16. Do not install this equipment in a confined or building-in space such as a book case or
similar unit, and remain a well ventilation conditions at open site. The ventilation should
not be impeded by covering the ventilation openings with items, such as newspapers,
table-cloth, curtains, etc.
17 The apparatus shall not be exposed to dripping or splashing and that no objects filed
with liguids, such as vases, shall be placed on the apparatus.
18. Protective earthing terminal. The apparatus should be connected to a mains socket
outlet with a protective earthing connection.
19. Minimum distances 10mm around the apparatus for sufficient ventilation.
20. The ventilation should not be impeded by covering the ventilation openings with
items, newspapers, table-cloths, curtains, etc.
21. No naked flame sources, such as lighted candles, should be placed in the apparatus
22. The use of apparatus in moderate climates.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture
Unpacking
Check that you have all of the following items.
If any item is missing, please contact the customer service hotline for assistance. The
hotline number is printed on the cover page of this user manual.
-ST-5000MKII
-AC Power Cable
-User Manual(with Warranty Statement)
-Quick Start Guide
-Speaker Stand
Stand Instruction
1. Tube Height
2. Locking Pin
3. Securing bolt height tube
4. Retaining bolt tripod foot
5. Stand Height: 63” (1.6M)
6. Three detachable legs
Stand Mounting:
the speakers are compatible with standard 1-½” (38mm) stands.
• Speaker stands must only be used on smooth level surfaces.
• Be certain you select a stand rated for at least 40lb. Contact your dealer for recommen
-
dations.
• Never mount more than one speaker on a stand.
• Add weight (i.e. sandbags) to the base of the stand for added stability. In a windy out
-
door location this is vitally important!
• Do not attempt to mount the speaker on a stand without an assistant.
1.Mount the speaker on its stand prior to making any electrical connections.
2.Check that the set screw in the speaker base is backed out enough to clear the stand post.
3.After placement, verify that the stand post is fully seated in the speaker base.
4.Tighten the set screw (by hand) to lock the speaker in place. Failure to do so may
result in injury or equipment damage.
media player with
Bluetooth, USB/SD
4.5” Titanium
Driver
Air port
Telescopling handle
18” woofer
Steel grill
top handle
Side handle
NFC
Luggage wheels
EQ(Equalizer)
GAIN / AUX / MP3 level
Mic / Line in / AUX: XLR,
or 1/4” Jack, 3.5mm Jack
Link out: XLR
WARNING!
BE CAREFUL OF THE UNFOLDER STAND TO PREVENT THE SERIOUS INJURY IN
CASE OF TIP OVER.
Part Description:
1
2
3
4
6
5
GETTING STARTED
Power On/Off Switch
•Power on the mechanical
•Turn Power switch on
•The power LED will turn on
Power connection
• Connect the supplied A/C cord to the speaker
• Plug the A/C cord into the wall outlet
• The unit will enter into Bluetooth mode,
Bluetooth LED will flash blue.
Bluetooth Connection / Pairing / NFC
A. Bluetooth Connection
• Make sure device (iPod, MP3 player, etc.) Bluetooth function is enabled.
• On the speaker, press the M button to select Bluetooth function, then your device and
speaker should be connected.
• Make sure to choose BLUETOOTH from your device to complete the connection.
• Only one Bluetooth device can be connected to the
ST-5000MKII speaker at a time.
B. Bluetooth Pairing
• Please search Bluetooth device on your mobile device, which name is “BLUETOOTH”,
after searching with it, you can click the “connection” and enter into “0000” if required.
Wall outlet
-4-
-5-
