LSU 110 / 32 - Local Signalization Unit User manual
Change the speed of lamp flashing with button »ACK HORN«.
Lamp flashing speed setting is confirmed with button »ACK HORN«. All lamps goes ON for
1 s. Device is now in set lamp logic mode.
Lamp logic setting:
lamp flashing means, that when dependent input will go active, lamp will flash until »ACK
LAMP« is pressed („OPERATION„ (»lamp – B«))
lamp ON means, that lamp will follow the input state; active inpute lamp ON, non active
input lamp OFF (chapter „OPERATION„ (»lamp – A«))
lamp OFF means lamp we are currently set (lowest right).
Page:
Device:
Document:
Code:
Date:
10
User manual LS3MUE01
