Edirol VC-50HD SDI 1394, Руководство пользователя

Страница: 16 / 37

16
Power supply
Installing AA batteries
Install commercially available AA batteries into the VC-50HD, following the procedure described
below.
* Zinc-carbon batteries cannot be used. You may use nickel-metal hydride batteries or alkaline batteries.
* Even if you’re using the AC adaptor, leaving AA batteries installed will provide a backup power supply in the
event that the AC adaptor cable is inadvertently disconnected.
* Even if AA batteries are installed, the power supply from the DC IN connector will take priority.
* It is dangerous to insert your hand or fingers into the opening of the VC-50HD when inserting or removing
the battery case. Do not insert your hand or fingers into the opening.
* When using the AA batteries in the battery case, do not subject the VC-50HD to vibration or physical shock.
The power may turn off if this occurs.
* The VC-50HD cannot recharge nickel-metal hydride batteries. You will need to acquire a commercially
available charger.
* Carefully read and observe all precautions and handling instructions that accompany the AA batteries.
1.
Remove the rear cover
Loosen the two screws that fasten the VC-50HD’s rear cover, and remove the rear cover.
* The screws cannot be removed from the rear cover.
fig.unscrew.eps
2.
Remove the battery case
fig.remove-case.eps