94
Controlling the SD-90 via MIDI
5.
When data transmission is completed, the display will indicate
COMPLETED
. Stop recording on your
sequencer software or external MIDI sequencer.
By playing back the saved bulk dump data on your sequencer software or external MIDI sequencer, you
can restore the SD-90 to the state in which it was when the data was saved.
Transmitting individual data
Individual data can be transmitted in each editing screen.
fig.8-3a
1.
In each editing screen, select the parameter that you want to transmit, and specify
its value.
2.
Hold down [SHIFT] and press [ENTER]. The highlighted parameter value will be
transmitted.
2
sd90_manual_e.book 94 ページ 2004年10月4日 月曜日 午後3時28分