manualshive.com logo in svg

Edirol Studio Canvas SD-90, Руководство пользователя

Поделиться
Скачать
Edirol Studio Canvas SD-90 Скачать руководство пользователя страница 46

 

46

 

Using the effects of the internal sound generator

 

MFX A-C Reverb Send Level (Multi-effect A–C Reverb Send Level)

 

0–127

 

Specifies the level at which the signal processed by the multi-effect will be sent to the Reverb effect.

 

MFX A-C Control 1-4 Source (MFX A–C Control 1–4 Source)

 

Specifies the control source that will modify the multi-effect parameter, and the sensitivity of the control.

 

MFX A-C Control 1-4 Sens (MFX A–C Control 1–4 Sensitivity)

 

-63–+63

 

Set this to a positive (+) value if you want to apply changes to the present value in the positive direction 
(higher value, toward the right, faster, etc.). Set this to a negative value (-) if you want to apply changes to 
the present value in a negative direction (lower value, toward the left, slower, etc.). The greater the value, 
the greater the change produced.

 

MFX A-C Parameter 1-32 (MFX A–C Parameter)

 

Specifies the parameter of the multi-effect that you want to use. The parameters that can be edited will 
depend on the type of multi-effect you select in MFX Type (Multi-effect Type). For details on each effect 
parameter, refer to 

 

MFX_E.pdf

 

 in the included CD-ROM.

 

Using MFX in Native mode

 

If you switch the sound generator to 

 

Native mode

 

, you will be able to control the sound and 

 

MFX

 

 

independently. In order to apply 

 

MFX

 

 to the sound of a specific part, you must do the following two 

things.

• Select the location (source) of the parameters used by MFX.
• Send the output of the part to MFX.

 

Select the location of the parameters used by MFX

 

MFX A SOURCE (MFX A source)

COMMON, 

 

PART 1–32

 

MFX B SOURCE (MFX B source)

COMMON, 

 

PART 1–32

 

MFX C SOURCE (MFX C source)

COMMON, 

 

PART 1–32

 

MFX parameters (e.g., algorithm, reverb type, distortion type) exist both within the sounds (COMMON) 
and outside them. For each of the three 

 

MFX

 

 units, you can specify which parameters the unit will use.

 

COMMON:

 

One of the three sets of parameters stored outside the sounds will be used. A part whose 

 

Part Output MFX Select

 

 setting is set to 

 

MFX

 

 will use the effect settings you specify, and 

will not be affected by the effect settings of the sound that is called up for that part.

 

PART 1–32:

 

The parameters stored within the sound called up for that part will be used. Parts whose 

 

Part Output MFX Select

 

 setting is set to 

 

MFX

 

 will be processed by the MFX effect settings 

of the part referenced by 

 

MFX

 

. When another sound is called up for the part that is 

referenced, MFX A will operate according to the MFX settings of the newly requested 
sound, and the previously mentioned parts will also be processed by these effect settings.

 

Value

Explanation

 

OFF

A controller will not be used.

CC01–95

Controller number 1–95 (except for 32)

PITCH BEND

Pitch bend

AFTERTOUCH

Aftertouch

SYS-CTRL 1–4

System control 1–4

sd90_manual_e.book 46 ページ ２００４年１０月４日　月曜日　午後３時２８分

Содержание Studio Canvas SD-90





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды