61
Using the audio effects
On the SD-90 you can use one internal stereo audio effect.
The signal to which the effect will be applied (i.e., the location of the effect) is selected by the
routing
preset
of the audio mixer. Depending on the location, the effect can be applied not only to the audio
input/output, but also to the output of the internal sound generator. You can also apply an effect to the
input source and send the result to your computer (recording “wet”), or monitor the processed sound
while recording only the unprocessed (dry) sound.
The general procedure for using an audio effect is shown below.
Select the location of the effect
|
Select the effect algorithm
|
Edit the effect
Select the location of the effect (Mixer Routing)
The location of the audio effect is determined by the audio mixer
routing
you select. For details, refer to
sd90_manual_e.book 61 ページ ２００４年１０月４日 月曜日 午後３時２８分
