Click <
Apply>
at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)
2.3 LAN
The LAN Port screen below allows you to specify a private IP address for
your router’s LAN ports as well as a subnet mask for your LAN segment.
Parameters Default
Description
LAN IP
IP address 192.168.2.1
This is the router’s LAN port IP
address (Your LAN clients default
gateway IP address)
IP Subnet Mask 255.255.255.0
Specify a Subnet Mask for your
LAN segment
802.1d Spanning Tree Disabled
If 802.1d Spanning Tree function is
enabled, this router will use the
spanning tree protocol to prevent
from network loop happened in the
LAN ports.
36