Edimax Wireless Multi-Homing Broadband Router Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 103

background image

PPTP Gateway

If your LAN has a PPTP gateway, then enter that PPTP gateway
IP address here. If you do not have a PPTP gateway then enter
the ISP’s Gateway IP address above

Connection ID

This is the ID given by ISP. This is optional.

MTU

This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you to not
wish to set a maximum packet size.

BEZEQ-ISRAEL

Select this item if you are using the service provided by
BEZEQ in Israel.

Connection Type

If you select “Continuous”, the router will always connect
to the ISP. If the WAN line breaks down and links again,
the router will auto-reconnect to the ISP.

If you select “Connect On Demand”, the router will auto-
connect to the ISP when someone want to use the Internet
and keep connected until the WAN idle timeout. The router
will close the WAN connection if the time period that no
one is using the Internet exceeds the “Idle Time”.

If you select “Manual”, the router will connect to ISP only
when you click “Connect” manually from the Web user
interface. The WAN connection will not disconnected due
to the idle timeout. If the WAN line breaks down and latter
links again, the router will not auto-connect to the ISP.

Idle Time

You can

specify an idle time threshold (minutes) for the WAN

port. This means if no packets have been sent (no one using the
Internet) throughout this specified period, then the router will
automatically disconnect the connection with your ISP.

Note:

The WAN "idle timeout" auto-disconnect function may not

work due to abnormal activities of some network application
software, computer virus or hacker attacks from the Internet. For
example, some software sends network packets to the Internet in
the background, even when you are not using the Internet. This
function also may not work with some ISP. So please make sure
this function can work properly when you use this function in the
first time, especially your ISP charge you by time used. Due to
the many uncontrollable issues, we do not guarantee the WAN
"idle timeout" auto-disconnect function will always work. In order
to prevent from extra fee charged by ISP, please

TURN OFF

THE ROUTER WHEN YOU FINISHED USING THE INTERNET

.

Click <

OK>

when you have finished the configuration above.

Congratulations

! You have

completed the configuration for the PPTP connection. You can start using the router now, if you
wish to use some of the advance features supported by this router see chapter 2, 3, 4.

22

«
...
20
21
22
23
24
...
»

Содержание Wireless Multi-Homing Broadband Router








































































































Отзывы:

Нет отзывов

Похожие инструкции для Wireless Multi-Homing Broadband Router

Бренд: Abocom Страницы: 11

Бренд: Abocom Страницы: 19

Бренд: Tripp Lite Страницы: 20

Бренд: Paradyne Страницы: 1

RUGGEDSWITCH RS900G

Бренд: RuggedCom Страницы: 23

Бренд: C-Data Страницы: 26

SUPERLOADER DLT MAGAZINE

Бренд: Tandberg Data Страницы: 6

SmartNode 4520 Series

Бренд: Patton electronics Страницы: 90

Бренд: JUMO Страницы: 60

IPS Pro-Module-24C-GE-BP-TM

Бренд: Trend Micro Страницы: 3

EdgeRouter ER-8

Бренд: Ubiquiti Страницы: 20

Бренд: PairGain Страницы: 80

Бренд: Abocom Страницы: 1

Бренд: Vaisala Страницы: 32

Бренд: Avigilon Страницы: 12

Routers and Switches

Бренд: Allied Telesis Страницы: 15

DiskStation Series

Бренд: Synology Страницы: 6

Бренд: ATCOM Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды