Parameters
Default Description
Mode
It allows to set the AP to AP or WDS mode.
ESSID default
This is the name of the wireless LAN. All the
devices in the same wireless LAN should have
the same ESSID.
Channel Number 11
The channel used by the wireless LAN. All
devices in the same wireless LAN should
use the same channel.
Associated Clients
Click “Show Active Clients” button, then an
“Active Wireless Client Table” will pop up. You
can see the status of all active wireless stations
that are connecting to the access point.
MAC address
If you want to bridge more than one networks
together with wireless LAN, you have to set this
access point to “AP Bridge-Point to Point mode”,
“AP Bridge-Point to Multi-Point mode” or “AP
Bridge-WDS mode”. You have to enter the MAC
addresses of other access points that join the
bridging work.
48
Содержание Wireless Multi-Homing Broadband Router
Страница 1: ...1 Wireless Multi Homing Broadband Router User Manual...
Страница 46: ...AP Bridge Point to Multi Point mode setting page 46...
Страница 47: ...AP Bridge WDS mode setting page 47...