Edimax WAP1200, Руководство пользователя

Страница: 37 / 96

Load Balancing Load balancing limits the number of wireless clients
connected to an SSID. Set a load balancing value
(maximum 50).
Authentication
Method
Select an authentication method from the drop
down menu and refer to the information below
appropriate for your method.
Additional
Authentication
Select an additional authentication method from
the drop down menu and refer to the information
below ( IV-3-1-3-6. ) appropriate for your method.
IV-3-1-3-1. No Authentication
Authentication is disabled and no password/key is required to connect to the
access point.
Disabling wireless authentication is not recommended. When
disabled, anybody within range can connect to your device’s SSID.
IV-3-1-3-2. WEP
WEP (Wired Equivalent Privacy) is a basic encryption type. For a higher
level of security consider using WPA encryption.
Key Length Select 64-bit or 128-bit. 128-bit is more secure
than 64-bit and is recommended.
Key Type
Choose from “ASCII” (any alphanumerical
character 0-9, a-z and A-Z) or “Hex” (any
characters from 0-9, a-f and A-F).
Default Key Select which encryption key (1 – 4 below) is the
default key. For security purposes, you can set up
to four keys (below) and change which is the
default key.
Encryption Key 1 – 4 Enter your encryption key/password according to
the format you selected above.
IV-3-1-3-3. IEEE802.1x/EAP
Key Length
Select 64-bit or 128-bit. 128-bit is more secure
than 64-bit and is recommended.
34