background image

 

 

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6.0, Netscape
Navigator 6.2.3.

DI-754

5GHz Multimode

Wireless Router

5V DC, 3A Power Adapter

©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-754.09252002

Before You Begin

1.

If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an 

Ethernet-based

 Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2.

It’s best to use the same computer that is connected to your modem for configuring
the DI-754 Multimode Wireless Router. The DI-754 acts as a DHCP Server by
default and will assign all the necessary IP address information on your network.

See Appendix at the end of this Quick Installation Guide or the Manual on the
CD-ROM for setting each network adapter to automatically obtain an IP
address.

Check Your Package Contents

DI-754 Multimode Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

 

 

 

 

         Using a power 

         supply with a 

different voltage rating 

will damage and void 

the warranty for this 

product. 

If any of the above items are missing, please contact your reseller.

Summary of Contents for AirPro DI-754

















Reviews: