Edimax HP-5102Wn, Руководство пользователя

Страница: 9 / 78

6
II. POWERLINE NETWORK
A minimum of two Powerline devices are required to establish
a Powerline network.
For best performance, plug Powerline adapters directly into
standard wall sockets. Avoid using multi-socket adapters.
It may be convenient to install and configure your Powerline
adapters in the same room, and then relocate the HP-5102Wn
to its preferred location after setup is complete.
II-1. Installation
1. Connect a Powerline adapter to your router via Ethernet cable and plug it
into a power socket. The power and LAN LEDs should display on.
2. Plug the HP-5102Wn into a power socket, and confirm the power LED is on.
3. The PLC LED on both Powerline adapters should indicate that a Powerline
connection is established. For the HP-5102Wn the PLC LED will display
on
(see LED Status ).