Edimax BR-6428nS V5, Руководство пользователя

Страница: 23 / 116

20
II-5. WPS Setup
If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use this
method to connect to the BR-6428nS V5’s Wi-Fi network.
1.
Press the WPS button on the
BR-6428nS V5 for 1 – 3 seconds to
activate WPS. The WPS LED will
flash for two minutes to indicate
that WPS is active.
2.
Within two minutes , press the
WPS button on the wireless
device/client to activate its WPS.
3.
The devices will establish a
connection. Repeat for additional
wireless devices.
Please check the instructions for your wireless device for how long
you need to hold down its WPS button to activate WPS.
II-6. Reset to Factory Default Settings
If you experience problems with your BR-6428nS V5, you can reset the device
back to its factory settings. This resets
all settings back to default.
1.
Press and hold the WPS/Reset button found on the back panel for at least
10 seconds, until the power LED begins to flash.
2.
Release the button when the power LED is flashing.
3.
Wait for the BR-6428nS V5 to restart. The BR-6428nS V5 is ready for setup
when the power LED displays
on.