background image

 

Name: 

Enter the name of your ISP. This information is for identification purposes only. 

Type:

 There six kinds of method (PPPoE/ PPPoA/ Static/ DHCP/ Bridge/ CLIP).   

Bridge Settings 

Encapsulation: 

Select you encapsulation type. (Supplied by your ISP).

 

PVC Settings 

VPI:

 If instructed to change this, type in the VPI value for the initial connection (using 

PVC 0). Default = 

0

VCI: 

If instructed to change this, type in the VCI value for the initial connection (using 

PVC 0). Default = 

0

QoS: 

Quality of Service type. Select CBR (Continuous Bit Rate) to specify fixed 

(always-on) bandwidth for voice or data traffic. Select UBR (Unspecified Bit Rate) 

for applications that are non-time sensitive, such as e-mail. Select VBR (Variable 

Bit Rate) for burst traffic and bandwidth sharing with other applications. 

PCR: 

Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak 

Cell Rate (PCR). This is the maximum rate at which the sender can send cells. 

SCR: 

The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be 

transmitted.

 

 

35

Содержание AR-6024WG










































































Отзывы: