12
MOUNTING THE COMPONENTS
Fastening the electronic regulator (I) to the tank
The electronic regulator (
I
) is delivered already wired in its box which then must be installed in the special hous-
ing on the front of the tank and then fix the earthing cable (
P
) (Pics. 11-12).
If installation is difficult, you can remove the lid by loosening the 4 screws.
Bring the power cable to the motor and secure it:
- to the side of the tank with the adhesive plate and clamp (Pic. 13)
- to the feeder tube support (
D
) using the cable ties (photo 14)
Insert the plug into the motor outlet (pic. 15)
Attention: prevent the casing (M) - (pic. 16) from coming into contact with the gear motor blades
Pic. 11
Pic. 12
Pic. 13
Pic. 14
D
ENGLISH
Pic. 15
M
Pic. 16
P
I