EdilKamin PELLKAMIN 10 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 32

background image

- 48

-

ENGLISH

INSTRUCTIONS FOR USE

Commissioning must be done by a Technical Service Centre
authorised by Edilkamin (CAT) prior to ignition and testing
according to the UNI 10683/2012 standard.

This standard indicates the control operations to be carried out,
aimed at ascertaining correct system function.

The CAT will also provide for calibrating the stove on the
basis of the type of pellets and the installation conditions, thus
allowing for the effectiveness of the guarantee.

If the first ignition is not carried out by a C.A.T. authorised by
Edilkamin, the guarantee shall not be effective.

For information, consult the website

www.edilkamin.com

There may be a slight smell of paint the first few times it is

ignited, however, this will disappear quickly.

Before igniting you must check:
• that installation is correct
• the power supply
• that the door closes properly to a perfect seal
• that the combustion chamber is clean
• that the display is on standby (the date, power or temperature

flashes).

If pellets with different characteristics are used, the stoves
must be recalibrated using a similar procedure to that carried

out by the DEALER when the insert is ignited the first time.

Using unsuitable pellets may: decrease efficiency; cause

malfunctions; stop the stove from functioning due to clogging,
dirt on the glass, unburnt fuel, etc.
A simple, visual analysis of the pellets may be carried out:

Good quality:

smooth, uniform length, not very dusty.

Poor quality:

with longitudinal and transverse cracks, very

dusty, various lengths and mixed with foreign matter.

NOTE regarding the fuel.
PELLKAMIN is designed and programmed to burn wood
pellets with 6 mm diameter.
Pellets are a type of fuel in the form of little cylinders, made
from compacted sawdust, compressed under high pressure
with no adhesives or foreign materials.
They are sold in bags of 15 kg.
For the insert to function properly, you MUST NOT burn
anything else in it. Using other materials (including wood)
will render the warranty null and void. Such use is detected by
laboratory analyses. Edilkamin has designed, tested and pro-
grammed their stoves to guarantee the best performance when
pellets with the following characteristics are used:
diameter: 6 millimetres
maximum length: 40 mm
maximum moisture content: 8%

calorific value: at least 4100 kcal/kg.

«
...
18
19
20
21
22
...
»

Содержание PELLKAMIN 10

































Отзывы:

Нет отзывов

Похожие инструкции для PELLKAMIN 10

Бренд: Cadel Страницы: 352

Бренд: Duraflame Страницы: 18

Бренд: Mi-Fires Страницы: 18

Бренд: Clarke Страницы: 4

Бренд: Clarke Страницы: 12

JUNIOR FRANKLIN

Бренд: Clarke Страницы: 12

Бренд: FRANCO BELGE Страницы: 28

Бренд: Bartscher Страницы: 20

EasyFuel II EF 3277

Бренд: Primus Страницы: 4

Бренд: Primus Страницы: 2

Бренд: Lacunza Страницы: 24

Бренд: Palazzetti Страницы: 84

VOGELZANG VG5710

Бренд: Ashley Страницы: 54

Бренд: Palazzetti Страницы: 38

ULTIMATE U39-LP

Бренд: Regency Страницы: 40

Бренд: Regency Страницы: 60

Бренд: Eco-ideal Страницы: 17

Бренд: WANDERS Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды