EdilKamin 812740-1139210 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 80

EdilKamin 812740-1139210 Скачать руководство пользователя страница 23

23

8. INSTALLATION

INSTALLER

The diameter of the smoke outlet is not the diameter of the chimney system. The chimney
system must be sized according to national and local regulations.

In particular, (non-exhaustive list) refer to EN 13384, EN 1443, EN 1856, EN 1457 and to all local
regulations.

Avoid the infiltration of condensation water through the chimney flue. If necessary, install an
anti-condensation ring - ask your chimney sweep.

Damage caused by condensation water is not covered by the warranty.

In some countries, in special conditions, multiple chimney flue installations are allowed.
According to regional regulations, additional safety systems are required when connecting to
multiple chimney flues. Your chimney sweep/technician is available for further information.

The product is not airtight: even if combustion air is taken directly from outside.

«
...
21
22
23
24
25
...
»

Содержание 812740-1139210

















































































Отзывы:

Нет отзывов