To get these ratings, use the batteries of the known brand names.
Using zinc-air batteries, remember that they have restrictions:
- Operating temperature not low than 10 ْ C (50 F)
- If you removed the battery’s protective sticker, start using the bat
-
tery (after activating, its shelf life is not longer than a month).
- To use fully this battery’s capacity, avoid modes with the high con
-
sumption current (top part of the table)
Turning on/off Recording
The LED blinking sequences indicate a rechargeable battery status
and available memory. The first sequence indicates a battery sta
-
tus: one flash – fully charged, two flashes – enough for work, and
three flashes – should be changed as soon as possible. The second
blinking sequence indicates the amount of memory available: one
flash – 75-100%, two flashes -51-75%, three flashes – 25-50%, and
4 flashes – 1-25%.
5.5 kHz 8 kHz
11
kHz
16 kHz
22
kHz
W/O compres-
sion, h
11,7
10
8,8
6,7
5,9
u-Law, hours
10,9
9,2
6,7
6
4,5
To start or stop recording, hold the
control button pressed during 2 sec-
onds until the LED lights up.
Consumption current in different modes at U
consumption
=1,5V.
