Edgewater Networks 265CC, Руководство пользователя

Страница: 15 / 36

15
6.3 High Pressure Washdown
The washdown system is comprised of a diaphragm pump, mounted in the starboard aft transom
area and accessed by removing the battery switch panel door assembly on the starboard aft wall
of the deck, and a washdown fitting to attach a hose. The pump is controlled by the washdown
switch on the control panel. The diaphragm pump is fed through the same
thru hull and high speed pickup as the livewell pump. The washdown hose
outlet is located forward under the starboard gunwale board. With an
attached hose, this system can be used to wash debris from the boat. The
switch should be turned on immediately prior to use and turned off when
not in use. When activated, the pump’s pressure switch will automatically
control the pump. It is normal for the pump to cycle on and off in response to flow rates and water
demand.
Always turn off the high pressure washdown pump switch when leaving the boat
unattended.
6.4 Freshwater System
The freshwater system is comprised of a diaphragm pump, mounted behind and accessed by
removing the portable head enclosure inside the console, and a two shower head assemblies.
The pump is controlled by the freshwater switch on the control panel. The diaphragm pump is fed
by a freshwater tank located in the fuel tank cavity. One shower head assembly is located on the
starboard side of the transom area, the other inside the console at the sink. The freshwater switch
should be turned on immediately prior to use and turned off when not in use. When activated, the
pump’s pressure switch will automatically control the pump. It is normal for the pump to cycle on
and off in response to flow rates and water demand.
Always turn off the freshwater pump switch when leaving the boat unattended.
6.5 Raw Water System Maintenance
The following checks should be made periodically to assure your system operates properly:
· Periodically spray pumps with a protective silicone solvent to reduce corrosion.
· Periodically check in-line filter to remove any collected debris.
· Fishboxes and livewells should be drained and cleaned after each use.
· Periodically check hoses and connections for signs of deterioration.