Edgewater Networks 245CC, Руководство для владельца

Страница: 223 / 234

17
Owner’s Manual
SWITCH OPERATION
The operation of the indicator switch
is based on the position of the bow.
To lower the starboard bow, press
the right (starboard) side of the
switch where it reads Down. This
lowers the port tab. To lower the
port bow, press the left (port) side
of the switch where it reads Down.
This lowers the starboard tab. The
L.E.D. displays on the sides of the
display show how far that tab has
moved.
When the on/off switch is turned
on at the helm or the engine’s
tachometer circuit becomes active,
the L.E.D. displays on the indicator
switch light from top to bottom
and immediately extinguish from
bottom to top to indicate self test at
power up. If there is a problem with
an actuator connection the L.E.D.
displays shows every other light
red ”ON“ at the side that has the
problem. After self test is complete
(1 to 2 seconds) the L.E.D. displays
show one up arrow on each side
of the switch. This shows that
both tabs are fully retracted. While
functioning the tabs, the L.E.D.
displays indicate the position of the
tabs by lighting up the further they
are pressed down. As the switch is
pressed up, the lights go out. When
power is removed from the switch or
the engine stops ( if accessory wired
to tach), the tabs retract from any
position before powering down.
Standard Switch
#15069-001
(124SSR)
To lower the
starboard
bow
To lower
the port
bow
Indicator Switch
with Retractor
#15070-001 (123SC)
Switch Operation
Completely
Waterproof