Koldfront Window Air Conditioner
6
Installing Cabinet into Window
Follow the steps listed below to install the cabinet into the window
1. Center empty cabinet into window:
Check that lower rail of air conditioner cabinet is
behind and against back side of window sill.
Maintain a firm hold on the cabinet and lower window
sash to hold the cabinet in place.
Measure the distance of the right side and left and
adjust until equal distance.
2. There are different methods to secure the cabinet into
window depending on the type of window.
For Wooden Frames:
-
Use a 3/16” drill bit to drill three starter holes 3/8”
deep through the three holes in the cabinet and
into the window sill.
-
Drill one starter hole 3/8” deep through the hole in
the middle of the top rail and into the window
frame.
For Vinyl Windows:
-
Use a 1/8” drill bit to drill one hole through the hole
in the middle of the top rail into the window frame.
Attach
cabinet to window with one #10 x ¾“
Phillips screw (B in figure above).
- Place two safety locks into the holes that are
located at the bottom of the cabinet and drive two
locking screws through the safety locks into the
cabinet as shown below.
NOTE: When choosing
your window make sure
power supply cord is
within 4ft of a grounded
3-prong outlet
A. #10 x ¾“ Phillips
Screw
B. Safety Locks (Only
for Vinyl Windows)
A.
#10 x ½” Phillips
Screws
B. #10 x ¾“ Flat Screws
C. Window Sill