11
To Change Temperature:
Press or hold either the Left (Decrease) or Right (Increase) button until desired temperature is
seen on the digital display. This temperature will be automatically maintained anywhere between
62°F (17°C) and 86°F (30°C).
To Adjust Fan Speeds:
To select the speed of the fan, press the Fan Speed button which cycles through four (4) steps:
Auto, Low, Medium, and High. Each time the button is pressed the fan speed mode is shifted to
the next speed option.
To Select Operating Mode:
To choose the operating mode, press the Mode button. Each time you press the button, a mode
is selected in a sequence that cycles from Auto -> Cool -> Dry -> Fan. The indicator light beside
the mode button will be illuminated and remain on once the mode is selected. The unit will
automatically initiate the Energy Saver function in Auto, Cool and Dry modes.
To Operate in Auto Mode:
When you set the unit to “Auto” mode the unit will automatically select cooling or fan
depending on the temperature selected and the current room temperature. The air
conditioner will automatically maintain room temperature around the selected
temperature.
In this mode the fan speed cannot be adjusted. It starts automatically at the appropriate
speed to reach and maintain the selected temperature most efficiently.
To Operate in Cool Mode:
When the unit is set to “Cool” mode it will cool the room to maintain the desired set
temperature.
When the desired temperature has been reached, the unit will automatically maintain the
temperature.
Press the Right and Left buttons to adjust the desired temperature and press the Fan
button to adjust the fan speed.
To Operate in Dry Mode:
In this mode, the air conditioner will operate as a dehumidifier. Because the conditioned
space is closed or sealed, some degree of cooling will continue to occur.
In Dry mode the fan runs at Low speed, which cannot be adjusted.
Note:
The unit does not constantly take temperature readings. The unit will take a temperature
reading periodically while operating in AUTO mode, or immediately upon adjustment of the
desired set temperature.
When operating in AUTO MODE the unit may not switch between Cooling and Fan Mode at the
exact moment when a temperature change has occurred.
Room temperature may be different than the temperature sensed in front of the air conditioner.
NOTE:
While in “Dry” mode, the fan speed is automatically set to Low and cannot be adjusted.
