EdgeStar CWD1550BL, Руководство по обслуживанию

Страница: 6 / 37

5
1. Close the water valve(s) entirely.
2. Select any procedure on Control Knob and press the “Start/Pause” button and let run for about
40 seconds. This will draw existing water out of the supply lines and into the tub.
3. Unscrew the supply hose(s) from the backside of the unit.
4. Pull out the inlet filter(s) with needle nose pliers and wash under warm water to remove any
debris.
5. Re-install inlet filter(s) and reconnect hose(s).
6. Open the water valve(s) and ensure there is no water leakage.
Drain Pump Filter:

According to the soil level within the cycles and the frequency of the cycles, you have to inspect
and clean the filter regularly.

The pump should be inspected if the machine does not empty or no spin;

The machine makes an unusual noise during draining due to objects such as safety pins, coins
etc. blocking the pump.
Removing foreign objects from Lint Trap / Coin Trap:
The Coin Trap (Lint Trap) can collect small objects from the wash cycle. Clean out the coin trap
regularly to ensure normal operation of washing machine. Please allow the unit to cool down sufficiently
before opening the coin trap knob as hot water may be present. The Coin trap door is located on the
front, bottom right hand side of the machine.
IMPORTANT: A small amount of water may be present in the
coin trap and will be released when knob is opened. Please
have a towel and/or small drain pan to catch any water.
WARNING: Hot water may be present if machine has not
been allowed to cool down sufficiently. Please allow unit to
cool down prior to removing coin trap knob.