Edge EDA2000.4AB-E6, Руководство пользователя

Страница: 8 / 16

1. Low level input
For connection to any source (head unit) with a low level output. This is your RCA output from the
source (headunit)
2. CH1 / 2 Gain control
This control is used to match the input signal of the source to the amplifier. See the setup section for
more details.
3.
CH1 / 2
Subsonic filter
This control is used to set the subsonic filter which is used to limit the very low frequency
information passed to the subwoofer. The frequency is adjustable between 10hz and 100Hz.
4. CH1 / 2 High Pass Filter (HPF)
This control is used to set the crossover frequency for the amplifier when HPF is
selected. The frequency is adjustable between 50Hz and 500Hz (500Hz and 5kHz when 10x
frequency multiplier is engaged)
5. CH1 / 2 High Pass Filter (HPF) Frequency multiplier switch
This Switch is used to select 1x and 10x frequency multiplier for the High Pass Filter.
6. CH1 / 2 Crossover mode select switch
This Switch is used to set the crossover mode to HPF, FULL or LPF operation.
7. CH1 / 2 Low Pass Filter (LPF)
This control is used to set the crossover frequency for the amplifier when LPF is
selected. The frequency is adjustable between 50Hz and 500Hz (500Hz and 5kHz when 10x
frequency multiplier is engaged)
8. CH1 / 2 Bass boost frequency
This control is used to set the bass boost frequency which is adjustable between 35Hz and 120Hz
9. CH1 / 2 Bass boost Control
This control is used to add bass boost which is adjustable between 0dB and +12dB.
10. Low level output
RCA output used to connect an additional amplifier or audio device.
11. Remote input socket
Used to connect the remote level control to the amplifier.
2 1 3 8 7 5 6 4 9 10 11
12 13 14 17 18 19 20 15 16
21 22
8
Terminals And Connections
EDA2000.4AB-E6