Edge DBX Series, Руководство пользователя

Страница: 9 / 20

9
To correctly set the gain control of the amplifier to match that of the source (headunit) use the
following setup routine:
Turn the gain control to minimum on the amplifier.
Ensure the bass boost is set to 0 dB.
On the headunit set all crossovers (if applicable) to flat and both bass and treble to zero.
Turn up the source (headunit) to approx 3/4 volume.
Very slowly turn up the gain on the amplifier until distortion can be heard in any of the subwoofers or
until the volume reaches an uncomfortable listening level when this is reached turn down the gain
control slightly.
The gain control is now set.
The setting of the crossover will depend on what kind of speaker you are installing.
For a subwoofer it is recommended that the crossover is set to Low Pass and the frequency is set to
match that of the
speakers specifications, or your preferred frequency - this is usually about 60 - 120Hz.
Note:
By using the crossovers correctly you will not only lengthen the life of your speakers but you will also
get better performance from them.
To optimise your setup seek the advice of a professional installation engineer or visit your local VIBE
audio dealer.
Set Up Section
Specification
Model EDA1200.1-E8 EDA1500.1-E8 EDA1800.1-E8
Configuration Monoblock Monoblock Monoblock
Dimensions
(H x W x D)
58mm (2.3”) x 280mm x
(11”) x 224mm (8.8.”)
58mm (2.3”) x 338mm x
(13.3”) x 224mm (8.8.”)
58mm (2.3”) x 378mm (14.9”) x
224mm (8.8.”)
RMS @ 4Ω Mono 1 x 400w 1 x 500w 1 x 600w
RMS @ 2Ω Mono 1 x 800w 1 x 1000w 1 x 1200w
RMS @ 1Ω Mono 1 x 1200w 1 x 1500w 1 x 1800w
Maximum Power 2400w 3000w 3600w
Frequency Response 10Hz - 500Hz 10Hz - 500Hz 10Hz - 500Hz
Crossover Type LP / Subsonic LP / Subsonic LP / Subsonic
Crossover Range 10hz - 150Hz 10hz - 150Hz 10hz - 150Hz
Recommended Fuse 2 x 40A (Internal ATC fuse) 150A (External fuse) 200A (External fuse)
Topology Class D Class D Class D
Call 09067031420
Calls cost 50p per minute. Call costs correct at date of
publication (01/02/12)
Hours of business 9.00am - 5.30pm GMT Monday - Friday.
All calls are recorded for training purposes.
MIDBASS Distribution
PO Box 11000
B75 7WG
UK Technical Enquiries