EDGE 540-V3 55cc Item code: BH92-A
.
Instruction Manual
14
XI. MOUNTING THE TAIL WHEEL
BRACKET
Set the tail wheel assembly in place on the
plywood plate. The pivot point of the tail wheel
wire should be even with the rudder hinge line
and the tail wheel bracket should be centered on
the plywood plate.
3x15mm
A/B Epoxy glue
C/A glue.
Mark and Drill
a hole 2mm
Secure
Secure
1)
Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.
2)
Secure the switch in place using the two
machine screws provided with the radio system.
XII. INSTALLING THE SWITCH
