Edge Products Juice Attitude, Руководство по установке, Страница: 7 / 24

WARNING An electrical
charge or battery acid can burn
you. Battery gas can explode or
ignite. Take care when working
around the battery. Follow in-
structions in the vehicle owner’s
manual for disconnecting and
reconnecting a battery.
CAUTION: It is strongly recom-
mended for this installation that
both batteries be disconnected.
1. Use a 13 mm or 8 mm
wrench to remove the NEGA-
TIVE terminal on each battery.
(The wrench size depends on
the battery style.)
2. Set the NEGATIVE terminal
aside and secure it so it does
not make contact with the bat-
tery during the installation.
3. Connect the MAP connec-
tors in between the stock har-
ness and the sensor.
Stock
Harness
MAP
Sensor
Installing the Juice Harness
Harness Connection Guide
Injector Control Pressure (ICP)
Sensor Connectors
EGT Connections
TPS Adapter
Cam Position (CMP)
Sensor Connectors
Manifold Absolute Pressure
(MAP) Sensor Connectors
JAB
Connector
Manifold Absolute Temperature
(MAT) Sensor Connectors
Main Juice Connector