Edge Products Juice Attitude, Руководство по установке, Страница: 21 / 24

Mount and Secure the Juice Module
1. Recheck all connections for a properly secure installation.
2. Using the supplied wire ties, secure the wiring harness and
cable to prevent possible heat damage from hot engine sur-
faces. (For the 7.3L, pay special attention to the routing of the
CMP harness as it is very close to moving parts.)
3. Reconnect the battery cables.
4. Start the engine. The engine should start and idle like a
stock truck. If the engine does not start or run properly, turn
off the engine. Remove the keys from the ignition, and check
the Juice module connections. Make sure all connectors are
fastened tightly.
Mount and Secure the Juice Module
Connecting the Juice Module
Final Installation
1. Plug the “Main Juice Connector” into the “Juice Module”
receptacle.
Main Juice
Harness
Juice
Module
1. Attach one side of each Velcro strip to the back side of the
Module and to the top side of a flat surface under the hood.
NOTE: The best place is the top of the fuse box on the driver side.
This will secure the Juice module and help keep it away from any
moving or hot components under the hood.