Edge Products ______________________________________GM Juice-Attitude CS/CTS
11
2.
Route the black turbo timer wire with the red female connector end into the side of the
fuse box to connect the turbo timer. Remove the fuse and install the supplied fuse tap to
connect to the right side (side closest to the fire wall) of the 10A TBC BATT fuse (
see
following pictures
). Re-install the fuse and cover.
Note: The Turbo timer will not function unless the vehicle has the Attitude monitor
installed.
FUSE TAP INSTALLED ON FUSE
Note: Reference the Diesel chart inside the fuse box cover or operators manual for fuse
identification. If the wire terminal does not fit snugly, carefully squeeze the terminal that
slides over the fuse tap until it fits more securely.
Connect the turbo
timer wire to the
right side of this
fuse, using the
supplied fuse tap.
Route the wire
through side of
fuse box with
existing harness
bundle, and “fish”
through box as
shown.
