Quick Start Guide
–
3
–
Safety and Regulatory Information
FCC Class A
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
You may use unshielded twisted-pair (UTP) for RJ-45 connections -
Category 3 or better for 10 Mbps connections, Category 5 or better
for 100 Mbps connections, Category 5, 5e, or 6 for 1000 Mbps
connections. For fiber optic connections, you may use 50/125 or
62.5/125 micron multimode fiber or 9/125 micron single-mode
fiber.
CE Mark
CE Mark Declaration of Conformance for EMI and Safety (EEC)
This information technology equipment complies with the
requirements of the Council Directive 2014/30/EU on the
Approximation of the laws of the Member States relating to
Electromagnetic Compatibility and 2014/35/EU for electrical
equipment used within certain voltage limits. For the evaluation of the
compliance with these Directives, the following standards were
applied:
RFI Emission:
Limit according to EN 55032:2015+A1:2020, Class A
Limit for harmonic current emission according to EN IEC
61000-3-2:2019, Class A
Limitation of voltage fluctuation and flicker in low-voltage
supply systems according to EN 61000-3-
3:2013+A1:2019
Immunity:
Product family standard according to EN 55035:2017
+A11: 2020
Electrostatic Discharge according to IEC 61000-4-2:2008
ED. 2.0
Radio-frequency electromagnetic field according to
IEC 61000-4-3:2020 ED. 4.0
Electrical fast transient/burst according to IEC 61000-4-
4:2012 ED. 3.0
Surge immunity test according to IEC 61000-4-5:2017 ED.
3.1
Immunity to conducted disturbances, Induced by radio-
frequency fields: IEC 61000-4-6:2013 ED. 4.0
Power frequency magnetic field immunity test according to
IEC 61000-4-8:2009 ED. 2.0
Voltage dips, short interruptions and voltage variations
immunity test according to IEC 61000-4-11:2020 ED. 3.0
LVD:
EN 62368-1:2014/A11: 2017
The Declaration of Conformity (DoC) can be obtained from
www.edge-core.com -> support -> download.
Japan - VCCI Class A
Laser Safety
Warning:
Fiber Optic Port Safety:
Avertissment:
Ports pour fibres optiques - sécurité sur le plan
optique
:
Warnhinweis:
Faseroptikanschlüsse - Optische Sicherheit:
Power and Battery Safety
PSE Alarm
本製品に同梱いたしております電源コードセットは、本製品専用です。本
電源コードセットは、本製品以外の製品並びに他の用途でご使用いただく
ことは出来ません。製品本体に同梱された電源コードセットを利用し、他
製品の電源コードセットを使用しないで下さい。
When using a fiber optic port, never look at the transmit
laser while it is powered on. Also, never look directly at
the fiber TX port and fiber cable ends when they are
powered on.
Ne regardez jamais le laser tant qu'il est sous tension.
Ne regardez jamais directement le port TX
(Transmission) à fibres optiques et les embouts de
câbles à fibres optiques tant qu'ils sont sous tension.
Niemals ein Übertragungslaser betrachten, während
dieses eingeschaltet ist. Niemals direkt auf den Faser-
TX-Anschluß und auf die Faserkabelenden schauen,
während diese eingeschaltet sind.
Warning:
If your switch uses a lithium battery, do not attempt
to replace the battery yourself. Return the switch to the
manufacturer for battery replacement.
Avertissement:
Si votre commutateur utilise une batterie au
lithium, n'essayez pas de la remplacer vous-même. Renvoyez le
commutateur au fabricant pour le remplacement de la batterie.
If the switch contains lithium batteries that are encased in a
sealed chassis, do not attempt to open the sealed chassis under
any circumstances.
Si le commutateur contient des batteries au lithium enfermées
dans un châssis scellé, n'essayez en aucun cas d'ouvrir le
châssis scellé.
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Risque d'explosion si la batterie est remplacée par un type
incorrect. Éliminez les piles usagées conformément aux
instructions.
Caution - Risk of Electrical Shock:
To disconnect
power, remove all power cords from the unit.
Attention - Risque de Choc Électrique:
Pour
débrancher, l’alimentation électrique, veuillez assurer tous les
cables d’alimentation sont retires de l’unite.
注意 - 感電の危 : 電源を切る場合は 、 電源コ - トを本装置から抜いて
くたさい 。
注意
-
有觸電的危險：如要切斷電源 , 請將全部電源線都從機器上拔掉
注意
-
有触电的危险：如要切断电源 , 请将全部电源线都从机器上拔掉
CLASS 1
LASER PRODUCT
PRODUIT LASER
DE CLASSE 1
LASERPRODUKT
DER KLASSE 1
