Quick Start Guide
– 2 –
Ground the MLTG-CN
Make Network Connections
Mount the MLTG-CN
a. Mount on a Pole
b. Mount on a Wall
Warning:
For a safe and reliable installation, use only the
accessories and screws provided with the device. Use of other
accessories and screws could result in damage to the unit. Any
damages incurred by using unapproved accessories are not
covered by the warranty.
Avertissement:
Pour une installation sûre et fiable, utilisez
uniquement les accessoires et les vis fournies avec l’appareil.
L’utilisation d’autres accessoires et vis pourrait endommager
l’appareil. Les dommages causés par l’utilisation d’accessoires
non approuvés ne sont pas couverts par la garantie.
Note:
The Uplink PoE port connection provides PoE power to
the unit.
1
Ground the MLTG-CN by connecting a ground wire to the grounding
point on the MLTG-CN and to nearby good earth.
2
RJ-45 Ports
1.
Connect outdoor-rated Category 5e or better cable to the
1000BASE-T RJ-45 Uplink PoE port. Be sure to use the included
weatherproof RJ-45 port cover.
2.
(Optional) Connect a local LAN switch or computer to the LAN
1000BASE-T RJ-45 port. Be sure to use the included weatherproof
RJ-45 port cover.
3
1.
Feed the steel-band clamps through the pole-mount bracket
points on the back of the MLTG-CN and then lightly fasten them
around the pole.
2.
Align the MLTG-CN antenna with a nearby Distribution Node
before tightening the clamps securely.
1.
Drill two holes in the wall for the included expansion plugs. Insert
the expansion plugs and the two screws in the holes.
2.
Align the MLTG-CN mounting bracket with the screws and then
slide the device down until it snaps into its secured position.
Installation
